MARS BLOG

Analyzing the damage to the laptop requires foresight and patience. Do not rush to decide before making a check the overal condition your laptop. here is some damage to the laptop that often occur :

Deaad or Power Failure

For the case of death that you should check first is your laptop batery. The possibility of your laptop batery runs out completelly. Try to recharge and wait for approximately 1/2 year hours. Another cause is the laptop adapter is not functioning. You can check the indicator light illuminates when charger in laptop adapter laptop in love. If the indicator light does not glow,there is the possibility of a faulty adapter or power connector board boarding laptop is damaged or defective. Another possibility board laptop,causing the total dead laptop at all.

Power light the flame but the LCD screen does not display images.

please check installing an external monitor on the VGA port on your laptop. Then turn on your laptop,if the laptop is still dead the possibility of damage is VGA,processor,mainboard,the BIOS IC or RAM, a dirty or damaged. Try to do check of the by one. And if an external monitor live and show images with normal,possible damage in LCD inverters,LCD flexible cable,or LCD monitor. If damage on the LCD screen,then you must replace the LCD screen,because the LCD screen does not can be fixed.

Laptop cooling problems.

Common problems that often faced by laptop users is heat problems,however heat is the main enemy of laptops,nearly 75% of damage laptop due to overheathing. especially in the casing laptop is almost no space empty all filled with the components. The problem that often appeared this section is blockage of the channel on the heatsink for heat dissipation obscured by dust. this is cause heat should be reissued entered into the laptop. as a result temperature inside the laptop up from the allowed. this can cause over heating in VGA chip,processor,and component another laptop mainboard.

ports and connectors power problems.

This problem is also common. This is caused by the breakdown solder in the connector or port. breakdown solder caused by heat and age of the laptop itself. The solution is to do re-solder on the part of solder developing cracks.

End of the article my be useful